Electrical
- Inputs
- 4
NewIP68
1 / 3
Certificates and properties
IP68 waterproof
UV resistant
Recyclable
Features
Specifications
- Resin insulated (filled) junction box
- 4 cable inputs
- Suitable for underwater use
- IP68 waterproof rating
Advantages
- Both components in one pouch — no measuring, no extra containers
- Mixed by hand in seconds, clean application
- Fully sealed, waterproof connection (IP68)
- Electrical insulation; protection against moisture and vibration
Technical data
Protection ratingIP68
Body and mounting
- Dimension
- 54 x 38 mm
Dimension drawings
Dimensions in millimetres (catalogue 2027). Tap a drawing to enlarge it.
How to install
A watertight cable connection with the AL 7004-4FT — no measuring, no mixing cups, no special tools.
1Preparing the resin pouch
- 1Fold
Fold one end over the inner barrier.
- 2Press
Press until the barrier opens.
- 3Knead
Mix well, corners included.
- 4Open & pour
Cut open and pour.
2Installing the junction box
- 1Connect the cables
Connect the cables to the terminal block and seat them in the cable entries.
- 2Mix the resin
Open the inner barrier of the resin pouch and knead it until evenly mixed.
- 3Pour
Cut the pouch open and pour the resin until all connections are fully covered.
- 4Let it cure
The cured resin seals every connection (IP68). Close the lid — ready after 24 hours.
Good to know
- Work at 15–30 °C and keep the box clean and dry. Use the mixed resin within its working time (about 10 minutes at 25 °C).
- Make and test the connections before filling. Wear protective gloves; follow the instructions on the pouch.
Representative image
In the catalogue
AKER LIGHTING 2027 General Catalogue
This product is on page 55 of our 2027 general catalogue. Open the page here or download the whole catalogue.
